This standard establishes uniform drafting practices for preparation of engineering drawing

1    SCOPE:
This standard establishes uniform drafting practices for preparation of engineering drawings.
2    APPLICATION: 
This standard applies to all new Sauer-Danfoss (SD) Engineering drawings.
3    GENERAL:
To ensure that drawings are unambiguous, international standards (ISO and IEC) are used for general principles of presentation, definitions, scales, dimensioning, symbols, tolerances, thread designations etc.
If no international standards are available, European standards (EN), national standards or Sauer-Danfoss Standards and Guidelines are used.
The reference to GS-0074 is as shown in figure 1.
If there is a reference to GS-0074, one or more of the Sauer-Danfoss documents listed in this Guideline are used.
If other standards are used, they must be the subject of special reference.
If a drawing refers to a standard that conflicts with a standard in the body of GS-0074, then the standard noted on the drawing shall have priority.
The English language version is the original and the reference in case of dispute.